|
|
Oden
Although Oden, is our simplest shelf it uses the same selected solid wood and solid aluminum spacers as our more expensive racks.
We've tried the factory-made shelves, but they sound noticeably worse than our hand-made solid wood shelves. We dare say that compared with most hi-fi racks the reproduction becomes more harmonious and more engaging with the Harmoni Oden.
We also offer a Harmoni kit which includes all the aluminum posts and hardware but allows you to make the wooden shelves yourself to build an Oden.
|
History
|
Introduction: The first Harmoni racks were manufactured in April 1999.
1999 - Upgrading washers in June
More than 10 years ago - forget exactly what ...
Tor-Kit damping 2000 (not to be confused with the current Tor)
Special rubber mountings. They became obsolete when Oden 1 was introduced.
Oden 1 upgrade in 2002
More washers were introduced to isolate the shelves better.
Support foot for the bottom shelf disappears.
Oden 2 Upgrade 2005
|
|
In March 2005 we introduced the "Oden 2" upgrade. Oden 2 is composed partly of "top-nuts" of solid aluminum, which fit on top of the uppermost shelf. This is not just to create a more stylish look, but a consequence of the other changes leaving a threaded rod sticking up through the top shelf. Moreover, certain washers have been replaced with nuts to stabilize the shelf better. On the bottom shelf, the spring washer was changed and moved beneath the shelf instead.
Goal of the upgrade:
- improved music reproduction
- less need for traction
- replacement of "ugly" top screws
Oden 2.5 upgrade in 2006
Oden 2.5 is simply a fine-tuning, and consisted of changing the nuts to flange nuts for increased stability (where necessary). The result is more order in the music and a more pleasant sound.
|
|